Position:How to do-disk utilities- How to manage EFI/UEFI boot options with DiskGenius Free on Windows?
Index
- Free program to manage EFI/UEFI boot options
- Guide 1: How to create/remove UEFI boot entry?
- Guide 2: How to Backup/Restore a UEFI Boot Entry?
- Guide 3: How to change UEFI boot sequence?
- Guide 4: How to boot UEFI BIOS directly from Windows?
- Guide 5: How to configure a unique UEFI boot entry?
- Conclution
UEFI (Unified Extensible Firmware Interface) is the new standard used by all newer computers and is meant to replace the traditional BIOS. UEFI can boot from drives larger than 2TB and allows Windows PCs to boot faster. Furthermore, it supports Secure Boot and ensures that the boot process is not tampered with by malware. Although you can enter the UEFI interface by pressing the required keys during computer startup, there is an easier way to access and manage the UEFI boot entries in Windows.
Free program to manage EFI/UEFI boot options
When it comes to free software to manage EFI/UEFI boot options in Windows, DiskGenius Free Edition has to be the best option. EFI/UEFI Boot Option management features are available for DiskGenius Free Edition. With this free software, you can edit, create, delete, restore, backup, EFI/UEFI boot entries, change EFI boot order, etc. in Windows. These features are designed in a user-friendly interface, so you can easily multitask in Windows without rebooting the UEFI firmware setup interface.
- Create, delete, edit, backup, restore, disable and enable EFI/UEFI boot options.
- Set a single boot option for the next reboot.
- Change the EFI/UEFI boot sequence.
- Choose to boot from Windows in the UEFI BIOS Setup UI.
- Create a WinPE-based bootable USB disk that allows you to boot your computer from USB when Windows crashes.
- Manage ESP partition (EFI system partition), e.g. B. Create, delete, backup, restore ESP drive.
In addition, DiskGenius Free Edition offers many useful features for disk and partition management, data backup, such as resizing partitions, converting GPT/MBR, erasing disks,Migrate Windows OS to SSD/HDD, clone disk/partition, map partition, scan and repair bad sectors, delete files permanently, HDD S.M.A.R.T. information, manage virtual disk, etc. In addition, it offers trial features for file recovery,RAW Drive Recovery, lost partition recovery, etc. DiskGenius is a Windows software and is compatible with all versions of Windows, both 32-bit and 64-bit.
Descargar Free
Guide 1: How to create/remove UEFI boot entry?
With DiskGenius Free Edition, you can easily create or remove EFI/UEFI boot entries in Windows without resetting the UEFI BIOS.
Paso 1Launch DiskGenius on UEFI-based Windows and clickTool>Set UEFI BIOS Boot Entries, as follows.
paso 2Click on the popup windowAddKnopf
level 3Browse your computer for the startup option you want to add and click on itOpen.
Removing a startup entry is just as easy: select the startup entry you want to remove and click on itextinguishKnopf.
Guide 2: How to Backup/Restore a UEFI Boot Entry?
When you turn on a UEFI-based computer, the Unified Extensible Firmware Interface (UEFI) firmware loads the boot files stored on the ESP partition to start the Windows system. Typically, the ESP partition contains the bootloader software for the installed Windows operating system. If the boot partition or files are missing or damaged, the Windows system may not boot normally. Therefore, you can create a backup of your boot entries. DiskGenius provides an easy way to back up your UEFI boot entries.
Paso 1Launch DiskGenius Free Edition on your UEFI-based computer and selectTool>Set UEFI BIOS Boot Entries, like the image below.
paso 2Select the boot entry you want to back up and clickfusibleKnopf.
level 3Name the backup file and set a location, then clicksave to computerKnopf.
If you need to restore the boot entry, just click onrestore somethingbutton as follows:
Browse for the backup file and clickOpenButton. After that, the boot entry will be restored.
Guide 3: How to change UEFI boot sequence?
How do I change the UEFI boot order in Windows? In many cases, computers boot very quickly and the boot process does not want to slow down to wait for users to press a key. Also, many users are not very familiar with working in UEFI BIOS. So it would be helpful if there was a way to change the UEFI boot sequence in Windows instead of resetting the UEFI BIOS firmware settings. The free UEFI boot manager software DiskGenius allows users to change the UEFI boot order in Windows instead of pressing a key during computer startup. Let's see how this works.
Paso 1Install and start DiskGenius Free Edition on your UEFI-based PC and selectTool>Set UEFI BIOS Boot Entries.
paso 2Select the boot entry whose order you want to change from the boot order list and clickupoLowto move it to the desired position.
Guide 4: How to boot UEFI BIOS directly from Windows?
The traditional method of entering UEFI BIOS setup is to quickly press the specific key or key combination on the keyboard during system boot, e.g. B. ESC, DEL, F10, F2 or other depending on the motherboard. The home screen shows you the button to press, and yet it's not easy for beginners. If you are not an advanced computer user and have difficulty accessing the UEFI BIOS firmware, please read the following guide which shows how to boot the UEFI BIOS directly from Windows. This way, you don't have to press the desired key as quickly as possible when the system starts up.
Paso 1Download, install, launch and select DiskGenius FreeSet UEFI BIOS Boot Entriesin betweenToolMenu.
paso 2In the pop-up window, select "Enter UEFI BIOS setup interface directly only at next boot' and clickOKButton. then clickRestart nowand the computer will reboot immediately.
The computer will restart.
The UEFI BIOS boot manager starts and you can change the boot order or go to the boot maintenance manager to configure other settings.
Guide 5: How to configure a unique UEFI boot entry?
Normally, your computer boots from its main hard drive/SSD which installs the Windows system. However, sometimes it may be necessary to boot from other devices, such as a bootable USB flash drive. To do this, you need to tell your computer's BIOS to boot from a different device instead of the standard HDD/SSD. In this case, you can set up a one-time boot in DiskGenius Free. The one-time boot option is the first boot option at the next boot and only at the next boot. After the boot option is executed, the original boot order is reused.
Paso 1Launch DiskGenius Free Edition on your UEFI-based computer and clickToolmenu to chooseSet UEFI BIOS Boot Entries, as follows:
paso 2Locate and select the boot entry you want to configure in the boot order listInitialize this entry next timeand clickSave current boot entryKnopf.
If you cannot find the boot entry you want to configure in the boot order list, click the Add button to add it to the list.
level 3CliqueRestart nowand your computer will immediately reboot and boot from the specified entry.
Conclution
DiskGenius Free is a useful and easy-to-use tool for users who want it.Manage boot entries for UEFI-based systems🇧🇷 This free tool can be used to change the boot order, edit, create, delete, backup and restore boot entries, set a unique boot entry for the next reboot, and boot into UEFI BIOS setup Windows. In addition, this tool can alsoCreate a bootable WinPE-based USB disk, manage ESP partitions for you.
FAQs
How do I manually add UEFI Boot Options? ›
From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Boot Options > Advanced UEFI Boot Maintenance > Add Boot Option and press Enter.
How do I fix EFI bootloader in Windows 10? ›- Insert the Media (DVD/USB) in your personal computer and restart.
- Boot from the media.
- Select Repair Your Computer.
- Select Troubleshoot.
- Select Advanced Options.
- Choose Command Prompt from the menu: ...
- Verify that the EFI partition (EPS - EFI System Partition) is using the FAT32 file system.
- Restart your computer.
- Press the necessary key to open UEFI/EFI. The key depends on your PC manufacturer and PC model. ...
- Once inside the UEFI/EFI setup menu, search for Secure Boot. ...
- Make sure Secure Boot is either Disabled or Off.
- Save these settings and exit the UEFI/EFI setup menu.
- Boot the PC, and press the manufacturer's key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. ...
- Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.
- From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > USB Options > USB Boot Support.
- Select a setting. Enabled—The system can boot from USB devices connected to the server. ...
- Save your setting.
...
To do this:
- Select Start > Settings > System > Recovery .
- Next to Advanced startup, select Restart Now.
- Under Choose an option, select Troubleshoot > Advanced Options > UEFI Firmware Settings, and then select Restart.
- Step 1: Enter the Automatic Repair mode. First of all, start the computer. ...
- Step 2: Repeat the process. You should repeat this process a couple of times. ...
- Step 3: Restart your computer. Once your system fixes the bootloader issues, restart the computer.
The Windows Boot Manager is a Microsoft-provided UEFI application that sets up the boot environment. Inside the boot environment, individual boot applications started by the Boot Manager provide functionality for all customer-facing scenarios before the device boots.
How do I bypass UEFI boot? ›- Hold down the Shift key and click Restart.
- Click Troubleshoot → Advanced options → Start-up Settings → Restart.
- Tap the F10 key repeatedly (BIOS setup), before the “Startup Menu” opens.
- Go to Boot Manager and disable the option Secure Boot.
- Verify That Your PC Is Equipped With UEFI. ...
- Bypass the Fast Startup Function. ...
- Create a Boot-to-UEFI Firmware Settings Desktop Shortcut. ...
- Change the BIOS From Legacy to UEFI by Converting MBR Disk to GPT Disk.
Can you factory reset from UEFI? ›
On the BIOS screen, press the Right Arrow key until the Exit option is highlighted. Press the Down Arrow key until Restore Defaults or Load Optimal Defaults is highlighted (whichever is listed), and then press the Enter key.
Can you add UEFI to BIOS? ›Press F2 when prompted to enter BIOS menu. Navigate to Boot Maintenance Manager -> Advanced Boot Options -> Boot Mode. Select the desired mode: UEFI or Legacy. If UEFI option was selected, a new option named Video BIOS appears, select UEFI.
How do I add Boot Options to system configuration? ›Adding a new boot entry
In Windows, you use BCDEdit to modify your boot options. To add a new boot entry, open a Command Prompt window with elevated privileges (select and hold (or right-click) Command Prompt and select Run as administrator from the shortcut menu).
- Download Media Creation Tool.
- Download Media Creation Tool.
- Create installation media for another PC option.
- Media Creation Tool change Windows 10 settings.
- Media Creation Tool USB Flash Drive Option.
- Select USB flash drive option to create UEFI Windows 10 installer.
...
To do this:
- Select Start > Settings > System > Recovery .
- Next to Advanced startup, select Restart Now.
- Under Choose an option, select Troubleshoot > Advanced Options > UEFI Firmware Settings, and then select Restart.